AlcoLimit Pro 2 Breathalyser |
The Pro2 Breathalyser reads to 2 decimal places and has a large digital display. It has excellent accuracy and is an ideal breath alcohol screening device at schools, after-work drinks, and for pre-tests for those subject to alcohol testing at work.
AlcoLimit Pro 2 Breathalyser is ideal for the following:
- Drivers wishing to stay safe on the roads
- P-Plate drivers
- Employees subject to mandatory testing at work
- Hospitals & health clinics
AlcoLimit Original now incorporates Flow Control Technology. AlcoLimit's Flow Control Technology means that the sensor checks the flow rate of your breath and must receive an adequate air sample before it will provide you with a reading. This is just one of the safety measures built into the AlcoLimit range.
AlcoLimit's Intelli-sensor Recognition Technology checks the sensor condition every time you use your breathalyser. Stability of the sensor is analysed as well as the level of alcohol residue built-up on the sensor. An indication will be given if the sensor needs recalibration.
Please Note: for accurate results users must wait at least 20 minutes after the cessation of drinking before testing. Use prior to this time will result in inaccurate readings and shorten the lifespan of the sensor.
Recalibration
Recalibration is required to maintain the prescribed accuracy. Each time alcoholic breath is blown into the breathalyser, alcohol residue deposits on the sensor. Over time, this leads to over-inflated readings as the unit reads the residue on the sensor plus the alcohol on your breath.
Recalibration frequency is generally every 9-12 months for personal use and 1-3 months for professional use.
Visit the AlcoLimit Home Page for details and to organise to have your breathalyser recalibrated.
SPECIFICATIONS | |
---|---|
PART NO. | ALCO005 |
MEASUREMENT RANGE | 0.00 - 0.40% BAC |
SENSOR TYPE | Semiconductor |
SOFTWARE TECHNOLOGY | Flow-control technology Intellisensor recognition technology |
MEASUREMENT ACCURACY | +/-0.01 @ 0.10% BAC |
CALIBRATION SETTING | Double Point @ 0.05% & 0.10% BAC |
CALIBRATION FREQUENCY | 6-12 months or every 200 uses |
SENSITIVITY DRIFT (WITH NON-USE) |
Typically 0.01% BAC per annum |
DISPLAY TYPE | LCD 2 decimal places with backlight |
DATA STORAGE | None |
CUMULATIVE TEST COUNTER | Yes |
WARM-UP TIME | < 1 minute |
BREATH SAMPLING TIME | 6 seconds |
RETEST INTERVAL | < 1 minute |
MOUTHPIECE | Yes |
OPERATING TEMPERATURE | 0 - 40 degrees celcius |
HOUSING | Shock resistant plastic |
WEIGHT | 105gms |
POWER SOURCE | 2 x 1.5V Alkaline "AA" batteries or Duracell Rechargeable 1700mAh(DC1500 NiMH) |
POWER USAGE | Over 200 times per set of batteries |
LIFETIME USES | Over 5000 tests |
DIMENSIONS | 116 x 59 x 27mm |
|